After conducting countless hours of in-depth research, we’ve put together what we think are the five best budget miter saws for beginners.
I’ll start with the very best, and then rest, as I know your time is valuable. Keep in mind, that these are budget options for newcomers, not the outright best miter saws on the market.
- Top-notch budget-friendly 12-inch compound miter saw that can handle a heavy workload.
- Equipped with a powerful 15-Amp motor that generates an impressive 4000 RPM for a budget saw.
- Bevels left at up to 48° & right at up to 3° with positive stops at 0°, 45°, and 33.9° for increased accuracy.
- Includes a carbide blade, dust bag, blade wrench, vertical clamp, and comfortable side handles.
Best Budget Miter Saw Reviews
1. DeWalt DWS715 12-Inch Compound Miter Saw
The DeWalt DWS715 is by far the best budget-friendly miter saw you can buy as it can make cross cuts, miter cuts, and bevels at a level of precision that other saws on the list just can’t match.
The DeWalt DWS715 is a super powerful tool with a 15 amp 120v motor which allows it to spin the blade at no less than 4000 RPM.
The vast array of accurate cuts you can make with DWS715 is in part due to the numerous settings and adjustments that are available.
Cutting hardwood with meticulous accuracy is easy enough with 14 position stops that can be adjusted at up to 45 degrees on both the left and the right.
Miter Saw Review
The DeWalt DWS715 is brilliantly engineered as it is fitted with a stainless-steel miter detent plate to provide outstanding stability, but at the same time, still allows for the saw to be transported easily.
Cutting everything from 2x4s to crown molding with the DWS715 is very much feasible due to the tall sliding fences that support up to 5-1/2 inches vertically.
In terms of cutting capacity, the DWS715 bevels 0° – 48° to the left and 0°- 3° to the right, while with a 2×8 piece of lumber it has a crosscut capacity at 90°, with a 2×6 section of lumber at 45°.
As for the fancy features included; the DWS715 comes with a small-sized dust bag, a standard DeWalt carbide blade, a blade wrench, a vertical clamp, and some rather comfortable side handles.
What’s to like about the DEWALT DWS715 12-Inch Compound Miter Saw
The almighty power of the DeWalt DWS715 is by far the most impressive attribute. The 15-Amp motor that is equipped with the DWS715 is head and shoulders above any other competitively priced models.
What’s not to like about the DEWALT DWS715 12-Inch Compound Miter Saw
While the DWS715 is considered to be a budget miter saw, it is the most expensive on the list. Although it is the best of the bunch in terms of cutting capacity, power, and accuracy of cuts, all this comes at a pretty penny more.
2. Craftsman CMCS714M1 Sliding Compound Miter Saw
It is often said that the less complicated a tool is, the better it performs. That’s exactly why the simple and compact Craftsman CMCS714M1 should prove to be a great addition to your workshop.
Craftsman CMCS714M1 is an excellent miter saw for beginners as it’s both a dual-bevel and a sliding miter saw. Not something you’d expect considering its budget price tag.
Specifically, in terms of ease of use, the handle has been ergonomically designed to make it easier and more comfortable, and this also means that as you operate the saw, you should be able to do so with more accuracy.
Miter Saw Review
For safety, there is a lockout power switch feature that prevents the motor from operating when not in use. Further safety is provided by a blade guard that ensures that not only are you protected from the blade, but also from particles of wood during the operation of the saw.
When cutting your wood, the angles and bevels are obviously done by making adjustments to the saw. Its 12-ich blade can be set to cut bevels up to 47 degrees with the common stops of 0°, 15°, 22.5°, 30°, and 45° all available to you too.
Incidentally, should you ever need to sharpen or change the blade, the saw has an arbor lock to make removing the blade a much easier task.
This is more of a robust and durable miter saw as it weighs 46 pounds and with dimensions of 28.3 x 18.1 x 20.5 inches, you can depend on this reliable workhorse to get the job done.
What’s to like about the Craftsman CMCS714M1 Sliding Compound Miter Saw
The Craftsman CMCS714M1 is fitted with a powerful 15 amp motor showcasing 4,500 RPM unloaded. We also like the fact that it comes with a laser cut-line guide system to help produce more accurate cuts.
What’s not to like about the Craftsman CMCS714M1 Sliding Compound Miter Saw
While the blade guard is a very welcome feature, unfortunately, it has been made from what appears to be cheap plastic, which can be easily broken and is not very easy to replace.
3. Skil MS6305 Dual-Bevel Sliding Compound Miter Saw
Skil’s MS6305 dual-bevel sliding miter saw is going to appeal to woodworkers and carpenters at all levels.
This is due to its portability and versatility, as can be moved from job to job, its powerful motor, for quick cuts, and its laser guide, for accurate alignment of the blade.
The most obvious can be noticed before it has even been switched on, and that is how light it is in terms of its weight.
It weighs only 25 lbs. so it will be suitable for those who work on jobs in multiple locations and need to be able to take their miter saw with them. Size-wise it is 14.5 x 17.5 x 22.1, so it should fit in even the smallest of workshops.
Miter Saw Review
Setting up cuts is made easier by the laser guide which is powered by 2 AAA batteries that are included. The laser guide allows for better and more accurate blade alignment, and thus, the cuts you make should be more precise.
The cuts you can make are fairly standard with a bevel on the left from 0 to 47 degrees, and mitering cut angles at the traditional stops of 0°, 15°, 22.5°, 30°, and 45° on both the left and the right.
When a cut has been completed, you can stop the blade instantaneously by operating the electric brake, which you do when releasing the operating switch. The 10-inch blade spins at an impressive 5,500 rpm, which is one of the fastest blade speeds we have seen with this type of miter saw.
What’s to like about the Skil MS6305 Dual-Bevel Sliding Compound Miter Saw
The base on the MS6305 is excellent with one of its main benefits being how stable it is. This means the amount of vibration you feel is almost negligible, which delivers meticulous accuracy, even when cutting things like crown molding.
What’s not to like about the Skil MS6305 Dual-Bevel Sliding Compound Miter Saw
The dust chute and bag are poor. The debris tends to clog in the chute and worse than that a lot of it is missed meaning that you will have shavings and wood dust floating around your workshop.
4. Evolution R255SMS Sliding Compound Miter Saw
The Evolution R255SMS is ideal for those who need to be able to transport their saw to multiple jobs thanks to it being lightweight.
That said, this doesn’t mean this saw it is not powerful enough to cut through wood with ease.
If you are looking for a compact and portable miter saw, then the Evolution R255SMS should be a prime candidate for you, given that it weighs only 31 lbs and is easily transportable.
The dimensions of 30.7 x 22.8 x 17.7 inches should also tell you that it is diminutive enough for you to transport around.
While the Evolution R255SMS might not be big in terms of its size, it’s 10-inch, circular blade, with 24 teeth, is more than powerful enough to cut through any wood materials. This is enabled by the 15 amp, 2.57 HP motor that powers it, and this can operate up to 4,500 RPM, which is impressive for any budget miter saw.
Miter Saw Review
In terms of cutting specifics, it can be set to bevel up to 45° to the left, and to both the left and the right it can be used to miter up to 52°.
You can also make use of the stops which are positioned at 0°, 15°, 22.5°, 31.°, and 45°, which are the angles most frequently used by woodworkers.
To allow for speedier adjustments, the Evolution R255SMS has thumb-activated stops, and another excellent feature is the clamping system for holding the piece you are working with.
Finally, and to ensure that the amount of dust and debris is kept to a minimum, the saw has an attachment for dust collection.
What’s to like about the Evolution R255SMS Multi-Material Miter Saw
Any tool with adjustable parts which are easy to move is one which is to be admired, so you will be pleased to know that bevel or angle adjustments on the Evolution R255SMS saw can be done with the minimum effort.
What’s not to like about the Evolution R255SMS Multi-Material Miter Saw
While it is not always possible for a miter saw blade to be designed to stop instantly, the one on this Evolution saw does seem to spin for a long time after you finish a cut.
You can certainly make accurate angled cuts with Evolution R255SMS, although, this saw is only a single bevel sliding miter saw. So while you can still make all the necessary angled cuts, it lacks the convenience of what dual bevel models offer.
5. Metabo HPT C10FCGS Compound Miter Saw
With Metabo HPT being the new name for Hitachi Power Tools you should know that the Metabo HPT C10FCGS is the same saw as the Hitachi C10FCGS. The Hitachi C10FCG had built quite a reputation throughout the years, and now the torch has been passed to the newly branded Metabo HPT C10FCGS.
You can certainly be confident that this miter saw will have all the attributes, reliability, and quality that you would normally associate with such a highly regarded and reputable brand.
It may come with a new brand name, but there is no denying that this saw has some very recognizable and highly desirable features.
The first of those is one you will become aware of the second you first hold it, given that it weighs less than 25 lbs. It is 24.2 lbs. to be precise, making it one of the lightest saws of its type and means you should be able to move or transport it anywhere you need to work with it.
The 10-inch blade is powered by a 15 amp electric motor which operates at a speed of 5,000 RPM, which should allow you to make miter cuts, crosscuts, and bevels with the minimum of effort. In terms of cutting angles, this saw can be set to cut bevels in a range between 0 and 45 degrees to the left.
Miter Saw Review
For miter cuts, the range is between 0 and 52 degrees for both the left and right, with thumb actuated stops in both directions at the customary 0, 15, 22.5, 31.6, and 45 degrees.
To make the job of cutting wood even easier and more precise, the large table on the Metabo HPT C10FCGS provides a stable platform that is further enhanced by the clamping system it has.
The fact that the Metabo HTP C10FCGS (also known as the Hitachi C10FCG) incorporates a horizontal handle for operating the blade provides a secure hold and promotes clean and accurate cuts every time.
What’s to like about the Metabo HPT C10FCGS Compound Miter Saw
While we are sure that this Metabo HPT miter saw is of high quality, the manufacturers have backed that up further with an amazing warranty period of 5 years. In comparison to some warranties which are only for one year, it bodes well for the durability of this product.
What’s not to like about the Metabo HPT C10FCGS Compound Miter Saw
Many people who do DIY or are carpenters by trade have a fair level of technical know-how, however even they are likely to be perplexed by the poorly written instruction manual which made the simple setup process appear to a lot more complex than it needed to be.
Best Budget Miter Saw Buyer’s Guide
If this is the first time you have bought a miter saw, you may be wondering what features you should be looking at when it comes to comparing the many products that are available for sale.
This buying guide will cover 5 features that you may want to compare or have a more detailed explanation so that you can decide whether it is important to you or not.
Types of Miter Saws
Just as there are multiple types of all sorts of DIY tools when it comes to miter saws, this is no different. For our purposes, and the answer you will get from most experts is, that there are basically three types of miter saws. These are standard, compound, and sliding compound miter saws.
Standard Miter Saw
This is the easiest to use and can be used for crosscuts and miter cuts of between 0 and 45° on both the left and the right. This type is normally lightweight, so is ideal if you need to use it in multiple locations. They also tend to be at the lower end of the price scale.
Compound Miter Saw
These can do everything the standard miter saws can do, but they are more versatile and have the additional functionality of being able to make bevel cuts. This can be done up to 50° on some saws, with others having a double bevel, which means you can make angled accurate cuts in both directions without having to flip over the piece of wood.
Sliding Compound Miter Saw: While a compound miter saw is versatile, due to the fixed arm mechanism the distance the blade can move is limited which in turn limits the maximum width of the piece of wood you are working on.
With a sliding compound miter saw, the blade and arm are attached to a sliding mechanism, which is normally a metal rail. This allows the blade to move up, down, in and out, so the size of the workpiece can be as much as three times as big as on normal compound saws due to this miter saw sliding function.
Dual-Bevel Compound Sliding Miter Saws
Unfortunately, you won’t find too many budget miter saws available sporting the dual bevel feature. These types of miter saws command a higher price tag than what’s listed here with these budget models.
But if you are in the market for a dual bevel compound sliding miter saw, we highly recommend taking a look at the DeWalt DWS780 or DWS779 which we recently conducted a review of.
In our opinion, the DeWalt DWS780 is the best compound sliding miter saw in the entire dual bevel range. It makes short work of complex projects like crown molding and delivers clean precise cuts regardless of the materials you’re using.
But, you have to consider if you’ll make use of a saw with a dual bevel feature, and this all depends on the projects you’ll be pursuing.
Amperage or amps is basically a measure of how much power anything which runs on electricity is drawing. This tends to be a standard feature on miter saws with almost all blade motors rated at 15 amps. Having said that, there are some which are rated as low as 13 amps, so if this is something that is important to you, then seek them out.
On most miter saws there will be a blade guard that is curved and follows the circular shape of the saw blade. It is located on the side closest to you, and its main purpose is to prevent anything, or more importantly, anyone, from coming into contact with the blade, especially when it is spinning. It tends to be made from clear plastic, and in many cases, it can be replaced if cracked or broken.
Dust Chutes/ Blowers/ Bags
This is a feature that will find on most miter saws, although there are big differences in how effective they are. Their principal job is to collect dust and small shavings so that they are not floating about where you are working and being breathed in.
These basic features seem rudimentary, but they will make like easy for you in the long run. They normally work in a similar fashion to a vacuum cleaner in that the dust is sucked into the bag, and the bag can be emptied when full. While they’re not the best at collecting fine dust, they’re much better than a saw without one.
Electric Brakes (safety feature)
Whenever you finish clean accurate cuts, for the reason of safety, you’ll want the blade to stop spinning as soon as possible. On many miter saws, this is achieved using an electric brake. It works by reversing the polarity of the electricity to the blade’s motor when you release the saw’s operating trigger, and this stops the blade from spinning instantaneously.
Best Budget Miter Saw FAQ.
What is a Compound Miter Saw and How is it used?
A compound miter saw is a miter saw which allows you to crosscut, make miter cuts, and also bevel cuts. The angles in which these cuts can be made differ in certain saws, but they generally range from 0° to 45° to the left and the right.
Most compound saws require you to flip your piece of wood to cut in both directions, although the dual head and sliding compound miter saws eliminate that.
If you’d like to dive a little deeper and get a better understanding of how to use a miter saw, we explained this in great detail in a recent post.
What Size Miter Saw Do You Need?
Miter saws do not really have a vast range of size differences so most of the sizes you see for sale should be alright. Although there is a difference in both cutting capacity and of course price with different size saws.
If this is something you’d like more clarification on, you can read more about what size miter saw to buy in our recent article.
What is a Miter Box?
A miter box is simply a tool that is used to guide a standard hand saw so that it cuts precisely. It usually comes in the form of an open box with three sides into which slots have cut at the most common angles such as 45 degrees, for example.
While homemade miter boxes can be made of wood, modern miter boxes are more likely to be made from metal or molded plastic. They can be a bit of a nuisance to use and obviously aren’t the best for larger projects like; crown molding.
10-Inch vs. 12-Inch; What is the Most Accurate Miter Saw?
One size you do need to consider is the blade size that the saw uses which will tend to be either 10 or 12 inches in diameter.
The 12-inch blade saws are the best option but are more expensive. They have advantages, like being able to cut thicker and longer pieces, whereas the 10-inch is more common for beginners. This makes the 10-inch the best choice if you’re starting out as they are considerably cheaper than the alternative 12-inch models.
Whether you go with a 10-inch or 12-inch, you should consider upgrading the saw blade to a diablo carbide blade. It will be a serious upgrade to any miter saw and deliver top-quality cuts every time.
Can You Use A Miter Saw To Cut Metal?
You can use a miter saw to cut most materials, including metal, but it is not ideal, and many experts will warn against it If you choose to use it, you must ensure that you fit your miter saw with the correct blade for that material.
For metal that blade is likely to be an aluminum oxide composite. This is another subject matter we covered in great detail and you can read more about whether you can cut metal with a miter saw if you’d like.
Do You Need a Miter Saw Stand?
This depends on where you’ll be utilizing your saw and whether you’ll be dealing with space constraints in your workshop. Typically, it’s best to consider buying a stand part of your budget, but also within your budget.
A quality miter saw stand won’t burn a hole in your pocket and you can check out some affordable options in our review of the best miter saw stand if you’re interested.
All the miter saws we have reviewed have a lot more positive aspects to them than negative, so our decision for crowning the best budget miter saw was a tough one.
But after much debate, we have gone for the DeWalt DW715 Compound Miter Saw for this review of the best budget miter saws, and for several very good reasons.
Even though this is a single bevel compound miter saw, you’ll still get a boatload of work done with it as it has all the necessary features you’d expect from miter saws.
The DeWalt DW715 has a very impressive range of cutting features, a large enough table, it’s extremely portable, and comes with an outstanding warranty period of 5 years.
Well, there you have it. You’re hopefully now on your way to potentially buying a compound miter saw that is right for you, and at the right price too.
No matter what saw you do choose, I’d recommend you swap whatever blade your miter saw comes with for a superior Diablo carbide blade. They make blades for both 10-inch and 12-inch miter saws and are complete game-changers.
All the best, and we hope this post has helped you make an important decision for your next DIY project.